bing tracking image
  1. Mud Flaps
  2. Rock Tamers
  3. Rear Pair
  4. 24 Inch Wide
  5. Universal Fit
  6. Rubber
Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black
Rock Tamers

Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black

Part Number: ERT00110
In Stock
$389.00
Retail:$399.99
You Save: $10.99
Mud Flaps
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle. Fastest Shipping and Great prices for Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black. Read our customer reviews of Rock Tamers mud flaps. Call 1-800-940-8924 for expert service or order your mud flaps part number ERT00110 by Rock Tamers online at etrailer.com.
  • All Info
  • Reviews (387)
  • Q & A (0)
  • Photos

Rock Tamers Mud Flaps - ERT00110

  • Rear Pair
  • 24 Inch Wide
  • Universal Fit
  • Rubber
  • Hitch Mount
  • No-Drill Install
  • Rock Tamers
  • Single

Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.


Features:

  • Protects your truck and towables from damage inflicted by flying rocks and debris
    • Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailer
    • Mounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection
    • Guards against backsplash - channels on the back direct water flow downward
  • Customizable to your vehicle's specifications for a perfect fit and maximum coverage
    • Pre-molded cut lines let you trim the mud flaps to any length
      • Includes punch tool to create bolt holes in mud flaps for attaching installation clamps
    • Vertical adjustment enables you to maintain consistent ground clearance no matter your load
      • Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place
    • Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks
  • Maintains the factory appearance of your vehicle
  • Use them when you're towing - take them off when you're not
  • Installs and removes easily - no drilling or welding required
  • Slide the center hub onto the shank of your 2-1/2" ball mount or tow bar (sold separately) and tighten it with set screws
  • Durable construction of all components ensures years of service and performance
    • Heavy-duty, 3/8" thick black rubber mud flaps with molded, tear-resistant fabric layer
    • Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside
    • Black powder coated aluminum clamps and stainless steel hardware attach mud flaps to support rods
    • UV-protected, black matte powder coat finish on forged aluminum center hub and arms
  • Mud flaps include polished, stainless steel trim plates with "Rock Tamers" logo
  • Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling


Specs:

  • Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailer hitch receiver and ball mount
  • Adjustable width (outside to outside): 67-3/4" to 97-1/4"
  • Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick
    • Length can be modified to create a custom fit
  • 1-Year limited warranty


Rock Tamers minimum clearance graphic

Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailer hitch receiver opening.


Rock Tamers adjustable width

Rock Tamers are adjustable to fit your specific vehicle's wheelbase. The mats move horizontally along the support rods and expand from 67-3/4" to 97-1/4" wide. The mats can also be adjusted vertically so that you can maintain proper ground clearance no matter the load you are carrying.


Rock Tamers pre-cut lines for adjusting length

The mats include pre-cut lines on the back in 1-1/2" sections so that you can trim the Rock Tamers to the appropriate length for your vehicle. A punch tool is included to create holes in the mud flap for attaching the installation clamp bolts.



00110 Rock Tamers Mudflap System, Matte Black/SS Trim Plates

Installation Details ERT00110 Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

387 reviews
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Well-made, totally functional.



by:



by:


25
387
Show More Reviews

See what our Experts say about this Rock Tamers Mud Flaps

  • Will The Rock Tamers Mud Flap System Fit On A Shocker Hitch HD Ball Mount
    While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black # ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount # SHK35VR, it will also interfere with the design of the shock absorber. As you can see in the attached picture the hub for the Rock Tamers comes into contact with the sidewalls of the mount, preventing it from flexing back and forth to absorb road shock. If you can tell me the year/make/model of your truck I can find...
    view full answer...
    Image 1 for
  • Anti-Rattle Solution for Use with Rock Tamers Mud Flaps
    Hey Charles, what about installing a set of mud flaps on the Jeep Wrangler like with the universal # 337B1218LSP? Otherwise you might look into a different anti-rattle device like the part # 63232 which would allow your Rock Tamer setup to install.
    view full answer...
  • Will Draw-Tite Ball Mount Fit with Rock Tamers
    Hey Dave, Since the Draw-Tite Ball Mount # RP45322 doesn't have that "stop" where the platform is attached to so while the Rock Tamers # ERT00110 will physically fit, I'm not confident it will stay in place. As an alternative, I recommend going with the Convert-A-Ball Ball Mount # AMSCV-4 instead, because it has similar features and specs, plus it has that stop that I'm talking about. Check out the linked video to see this ball mount in action.
    view full answer...
  • Distance from Hitch Pin Hole to Ball Center of Curt Ball Mount # C93JR
    Hey Roger, we went and took that measurement and found that it is 9-1/2 inches like you can see in attached picture. This would also have enough room for a Rock Tamers mud flap like the part # ERT00110 as well.
    view full answer...
  • Will B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate Work with Rock Tamers
    Correct, the B&W Tow & Stow 2-Ball Mount part # BWTS20066BMP would not work with Rock Tamers Heavy-Duty, Adjustable Mud Flap System part # ERT00110 as there is not enough room on the shank. I don't think there's a ball mount that does both so your best option from B&W is the B&W Tow & Stow 2-Ball Mount part # BWTS20040B as it has two hitch pin holes.
    view full answer...
  • Will Rock Tamers Heavy-Duty Adjustable Mud Flaps ERT00110 Fit Fastway Ball Mount FA42-00-2825
    The Rock Tamers Heavy-Duty Adjustable Mud Flap System for 2-1/2-Inch Hitches # ERT00110 requires at least 1-inch of available space on the ball mount shank. This 1-inch of clearance between the back of the ball mount face and the trailer hitch receiver opening is needed for the mounting collar which is secured with the two included bolts. On the Fastway Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2825 the available space on the shank from the center of the hitch pin hole is 3-inches....
    view full answer...
    Image 1 for
  • Can Weigh Safe Adjustable Ball Mount be Used with Rock Tamers Mud Flaps
    Hey Bill, Yes the Weigh Safe adjustable ball mount with scale part # WS46ZR that you referenced can be used with a Rock Tamers mud flap setup for a 2.5 inch hitch like the part # ERT00110. Do you have a car hauler that you are towing?
    view full answer...
  • Can the Access Rockstar Mud Flap Kit Have Height Adjustments?
    Hey Donald, The Access Rockstar Mud Flap Kit # A92NG installs using fixed bolt locations so it won't be adjustable up and down at the back of your 2022 Ram 3500. If you'd rather have mud flaps with some flexibility, then I recommend checking out the Rock Tamers which come available to fit 2" # ERT00108, 2-1/2" # ERT00110, and 3" # RT54FR Receivers depending on what your truck is equipped with. These have height and width adjustment built into them and they're pretty universal so you can...
    view full answer...
  • Do Jam Nuts Stay Loose When Installing Rock Tamers Mud Flaps on Hitch Collar
    Hey Mike, I'll be happy to help you out! What you want to do is snug down the bolts on the Rock Tamers # ERT00110 and then once they are installed, you'll tighten down the jam nuts. I've attached a clip from the instructions for you to check out. Let me know if you have any other questions!
    view full answer...
  • Rock Tamers Needed For A 2024 GMC Sierra 2500 With Blue Ox WDH
    Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want # ERT00108, for 2.5" x 2.5" you need part # ERT00110. The WDH shank should be what you're going off of so 2" is more likely what you'll need. Rock Tamers offers a bolt-on heat shield # RT76FR to help protect the flaps from the exhaust. If you ever change out the WDH with something that has a...
    view full answer...
  • Will Rock Tamers Fit with Shocker Hitch HD on a 2025 GMC Sierra 2500HD AT4
    Hey Dave, thanks for reaching out! The Rock Tamers # ERT00110 won't fit with the Shocker Hitch HD # SHK65VR just due to how much space the Shocker takes up, like you mentioned. For this case you'll either need to find a different way to keep rocks from kicking up or use a different ball mount. Which of the products above were you wanting to use more?
    view full answer...
  • Will Rock Tamers Mud Flaps Fit on the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch
    Hey Mike, thanks for reaching out again! The BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # MD256 can work with the Rock Tamers # ERT00110, but the fitment is all determined by the depth of the hitch receiver on your truck. The Rock Tamers require 1" of space on the shank and from the rearmost hitch pin hole to the gusset on the back of the BulletProof ball mount is 5" so you just need to see what the hitch pin hole to face of receiver measurement is on your truck to confirm the fitment. I...
    view full answer...
  • Outside Measurement of Roadmaster Anti-Rattle Hitch Extender
    Hi Dan; the outside tubing on the Roadmaster Anti-Rattle Hitch Extender # RM-071-1075 is 2-1/2" x 2-1/2" so you would need the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches # ERT00110.
    view full answer...
  • Will Buyers Products Pintle Hook Mount Work with Rock Tamers Mud Flaps
    Hey Gerrit, since your Rock Tamers mud flap like the part # ERT00110 only requires 1 inch of clearance on the shank the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver # 337PM25812 will work with it as it will have more than enough clearance.
    view full answer...
  • Will B&W Tow & Stow 2-Ball Mount Fit with 2-1/2 Inch Rock Tamers on 2022 GMC Sierra
    To determine whether or not the B&W Tow & Stow 2-Ball Mount # BWTS20037B will work properly on your 2022 GMC Sierra 2500HD with the Rock Tamers # ERT00110 you will need to measure from the center of your hitch pin hole to the face of the hitch receiver so we can make sure you will have at least the 1" spacing required for the Rock Tamers to fit (see attached photo). According to the measurements that we have taken of the Tow & Stow, from the back of the ball mount to the center of the...
    view full answer...
    Image 1 for Image 2 for
  • Heat Shield Needed For Rock Tamers Mud Flap System To Protect From A Hot Exhaust Pipe
    To prevent your exhaust from melting the Rock Tamers Heavy-Duty, Adjustable Mud Flap System # ERT00110 you can mount a heat shield like part # RT76FR on the flap. This will allow you to place the mud flaps in by the exhaust and not have to worry that they'll be damaged or allow rocks to fling up into the bumper.
    view full answer...
  • Recommended Ball Mount for Rock Tamers with 2.5" Hitch
    In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part # ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches Adjustable 2-Ball Mount part # HD256. The Self-Locking, Adjustable 2-Ball Mounts don't offer enough shank to accommodate the Rock Tamers.
    view full answer...
  • Are The Rock Tamers 2.5" Compatible With Stow & Go Hitch and Anti Rattle Quiet Hitch?
    If you have a 3 inch hitch on your 2020 Ford F-350 and you're using the B&W Tow & Stow 3-Ball Mount # BWTS20049B with an adapter sleeve # C45408. You will be able to use the Rock Tamer Mud Flaps # ERT00110. All you need to use these flaps is at least 1 inch from the hitch to the end of the shank of the ball mount. The Tow & Stow has two holes. The front hitch pin hole is 3 inches to the end of the shank and the last hole is 4 inches. So you should have plenty of room to put the Rock Tamers...
    view full answer...
  • Rock Tamers Heavy Duty Mud Flaps For 2017 Ford F-350 With Class 5 Hitch Receiver
    The Rock Tamers Heavy Duty Mud Flaps are a great addition to a truck or RV. This will protect your vehicle and the towed items from stray rocks, debris, and water backsplash. For a 2" receiver go with Rock Tamers # ERT00108, for 2-1/2" receiver use # ERT00110, and for 3" receiver use # RT54FR. The adjustable-width for these mud flaps is 67-1/4" to 96-3/4". Just as a side note, there must be at least 1" of clearance between the back of the ball mount and the trailer hitch opening so that...
    view full answer...
    Image 1 for
  • Will the Rock Tamers Mud Flap System Work with a Weigh Safe True Tow WD System
    The Replacement Hub for Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches, part # ERT057, is designed to fit around 2-1/2" accessories. Your Weigh Safe True Tow WSWD8-2.5 has a shank for 2-1/2" shank, so fitting around the shank will be no problem. As for having enough space, that is something that I could not confirm since I could not get the measurements of your shank. However, if there is a distance of at least 1" between the lip of your receiver and the closest...
    view full answer...
  • Recommended Rock Tamer Mud Flaps for a 2020 Chevy Silverado 2500
    The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part # ERT00108 for 2" hitch receivers or part # ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the inside opening to see if you get 2" or 2-1/2". Please note, you will need to use a ball mount with a shank long enough for the clamp on the Rock Tamer Mud Flaps to attach. This will not be an issue for most ball mounts but the Weigh Safe 2-Ball Mount w/ Built-In...
    view full answer...
    Image 1 for
  • Hitch Pin Hole Distance On Blue Ox Adjustable Ball Mount # BLU89XR For Rock Tamers Mud Flap System
    The Blue Ox Adjustable Ball Mount # BLU89XR has a distance of 4-11/16" from the center of the furthest receiver hitch pin hole to the weld on the tube. The shorter hole is 3-7/16" from the center of the receiver hitch pin hole to the weld on the tube. Since the Hub # ERT057 for the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches # ERT00110 requires 1" of space you will need to measure the distance from the center of the hitch pin hole on your receiver to the collar...
    view full answer...
    Image 1 for
  • Fitting Rock Tamers Mud Flaps for 2-1/2 Inch Hitch Receivers on a Weight Distribution System Shank
    You can replace the hub to the Rock Tamers using part # ERT034. It's the replacement hub for systems that fit a 2 inch ball mount but they're interchangeable. The downside is you'll need to change the hub everytime you're switching trailers since you want the 2-1/2 inch when towing your boat or utility trailer and the 2 inch for the camper. Another option is to change the shank of the weight distribution system to a 2-1/2 inch so you won't have to convert the Rock Tamers, part # ERT00110,...
    view full answer...
  • Solution Similar to Rock Tamers Mud Flap When There isn't Enough Ball Mount Shank Clearance
    Hey Chris, so you don't have the needed shank clearance to use the Rock Tamers part # ERT00110 so you could find a ball mount that has a longer shank to allow it to fit or you could go with something like the Access Mudflaps part # A89TJ that fits your truck and provides a similar rock guard type protection.
    view full answer...


< Previous
123. . .4



Do you have a question about this Mud Flap?


Info for this part was:

Employee Tyler C
Updated by:
Tyler C
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Daron K
Updated by:
Daron K
Employee Jenny M
Updated by:
Jenny M
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Lincoln B
Updated by:
Lincoln B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jon G
Test Fit:
Jon G
Employee David F
Installed by:
David F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<